Room-temperature multiferroic characteristics and unique vortex domain structures of h-Yb1−xInxFeO3 solid solutions

Hexagonal rare-earth ferrites (h-RFeO₃) have attracted much scientific attention due to their room-temperature multiferroicity. However, it is still a hard job to obtain h-RFeO₃ bulk materials because of the meta-stability of such hexagonal phase, and the evaluation of room-temperature ferroelectric and magnetoelectric characteristics in such materials is also a challengeable issue. In the present work, Yb_1−xIn_xFeO₃ ceramics with the stable hexagonal structure were obtained by introducing chemical pressure, where the unique ferroelectric domain structures of sixfold vortex combined with tenfold vortex with a typical size of ~400 nm were determined. Symmetry of the present system evolved from centrosymmetric orthorhombic Pbnm (x = 0–0.4) to non-centrosymmetric hexagonal P6₃cm (x = 0.5 and 0.6) with a ferroelectric polarization up to 3.2 μC/cm², and finally to centrosymmetric hexagonal P6₃/mmc (x = 0.7 and 0.8). The Curie point decreased monotonically from 723 K to a temperature below room temperature with increasing x, and the antiferromagnetic phase transition above room temperature was determined for all compositions. Meanwhile, a large linear magnetoelectric coefficient (α_ME) up to 0.96 mV/cm Oe was obtained at room temperature, and this indicated the great application potential for magnetoelectric devices.     

激光切割路径的自适应飞行半径果蝇算法优化

为提高激光切割路径优化效果,同时针对果蝇算法(FOA)中果蝇个体的飞行半径的设置主要依靠经验的缺陷,提出了基于自适应飞行半径果蝇算法(AFRFOA)的激光切割路径优化方法.相比于FOA,AFR-FOA中的果蝇个体的飞行半径会随着迭代次数的增加而自适应的变化,克服了固定半径的缺陷,能够实现全局搜索和局部搜索的平衡.钣金激光切割路径优化实例表明,AFRFOA获得的切割路径中,空行程更短,切割耗时更少.     

时装画教学中“联动式”训练方法探究——以五官绘制为例

时装画是展现服装外观形式美的手段之一,在服装设计、服装宣传中经常用到,画好时装画尤为重要,时装画的训练方法成为关键。通过时装画教学实践,发现练习绘画人脸五官时存在着一系列问题,如平衡对应问题、透视问题、比例问题、形态问题等,针对出现的问题提出应对方法——"联动式"训练。通过实践证明,"联动式"训练对于出现的问题有很好的矫正作用,并为时装画教学提供了一定的参考和借鉴。     

Physical study of room‐temperature‐cured epoxy/thermally reduced graphene oxides with various contents of oxygen‐containing groups

In this study, the effects of different oxygen‐containing group contents in thermally reduced graphene oxides (TRGs) for enhancing the physical properties of epoxy nancomposites was examined. The epoxy/TRG nanocomposites (ETNs) were prepared by a room temperature curing method in the presence of TRGs containing different oxygen‐containing groups and were then characterized by Fourier transform infrared spectroscopy. TRG contents with higher oxygen‐containing group contents (ca 33%) were found to show better dispersion capability in the epoxy matrix than TRGs with lower oxygen‐containing group contents (ca 11%) based on morphological observations by transmission electron microscopy. The better dispersion capability of TRGs with higher oxygen‐containing group contents in ETN membranes was found to lead to significantly enhanced mechanical strength, thermal stability and thermal conductivity based on measurements of dynamic mechanical analysis, tensile tests, thermogravimetric analysis and by the transient plane source technique. © 2014 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry     

A convenient crosslinking method for sulfonated poly(ether ether ketone) membranes via friedel–crafts reaction using 1,6‐dibromohexane and aluminum trichloride

In this study, sulfonated poly(ether ether ketone) (SPEEK) was very efficiently crosslinked via a Friedel–Craft reaction using 1,6‐dibromohexane and AlCl₃. The resulting crosslinked SPEEK (c‐SPEEK) membranes exhibited improved dimensional stability, thermal and chemical stability, and mechanical strength with slight reduction in the elongation. The methanol permeability was reduced by approximately two orders of magnitude by the crosslinking reaction. The proton conductivities of c‐SPEEK membranes were greater than Nafion‐212 in the temperature range of 30–90°C. Overall, this new crosslinking method can be conveniently and efficiently applicable to most aromatic hydrocarbon polymer membranes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40695.     

Effect of solid‐state shear milling on structure and properties of HDPE/UHMWPE blends

The structure and properties of HDPE/UHMWPE blends prepared through a pan‐milling reactor in solid state at ambient temperature were compared with the blends made by melt mixing. The changes of structure and properties of the blends were investigated by FTIR, melt flow index, mechanical properties, dynamic rheological measurement, DSC, and WAXD. DSC measurement illustrated that after pan‐milling treatment, the half‐width of the melting temperature became smaller. The more content of UHMWPE added in the blend, the more evident change was observed. Combined with the dynamic rheological analysis, it was proved that, the pan‐milling treatment can improve the compatibility of the HDPE/UHMWPE blends. X‐ray diffraction analysis showed that after pan‐milling treatment some ordered structure could be induced, but after heat treatment, the induced crystalline structure disappeared. The tensile properties of pan‐milled HDPE/UHMWPE blends also achieved improvement after pan milling treatment. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39916.     

Production and isolation of chitosan from Aspergillus terreus and application in tin(II) adsorption

Fed‐batch fermentation was used for biomass and fungal chitosan production by Aspergillus terreus (BCRC 32068) grown in a potato dextrose agar medium. The polysaccharides were extracted by an alkali–acid treatment, and structural investigations by X‐ray diffraction, Fourier transform infrared analysis, and viscosity and thermal analysis were done. A high level of chitosan was extracted from A. terreus; this implied that it was feasible to produce chitosan from industrial waste mycelia. Fungal chitosan derived from A. terreus showed the highest adsorption capacity for Sn(II). The order of Sn(II) adsorption capacity for these chitosanaceous materials was Fungal chitosan > Chitin > Biomass. Fungal chitosan derived from A. terreus was well correlated with Langmuir's isotherm model. The maximum capacity for Sn(II) sorption deduced from the use of the Langmuir isotherm equation was 303 mg/g; this was significantly higher than that of A. terreus. Fungal chitosan is an easy and cost‐effective material for the abatement of pollution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40436.